PR 16-2K makes some profiles deep and sensitive with its double thickness property according to the request. Surface sensitivity is ensured so easily because of its pneumatic presses with compact intervals. The body of the machine is a single piece of cast iron.
Speed adjustment can be done easily due to its electronic speed adjustment and the current speed can be seen on the panel as being m/sec. The puller on the exit is made from nythrile rubber to protect the marks on the wood surface.
There is a manual tray lubrication pump to protect the sticking of the wood to the plaques because of the resins that are left by the woods. Due to the fully protected cabin, PR 16-2K ensures the full work and workers security and creates a soundless working condition. Wooden houses, ceiling, flooring, parquets, woodwork, border and MDF profiles can be easily produced.
|Min. Max. Working Width||20 - 200 mm.|
|Min. Max. Working Height||10 - 100 mm.|
|Min. Max. Tool Diameter||120 - 160 mm.|
|Number of Spindle||6|
|Spindle Speed||6.000 r.p.m.|
|Spindle Diameter||40 mm.|
|Number of Feed Rollers||7|
|Diameter of Feed Rollers||140 mm.|
|Feed Speed||10 - 24 m/dak.|
|Adjustment Range of Surfacing Table||0 - 10 mm.|
|Diameter of Exhaust Air Outlets||125 mm.|
|Number of Exhaust Air Outlets||6|
|Total Amount of Exhaust Air||7.200 m3/h|
|Total Motor Power||31 Kw.|
|Operating Voltage||380 V - 50 Hz|